How To Use A Car Frame Machine
The car frame machine is essential for ensuring the functionality and longevity of a vehicle post-repair. Commonly used in automotive maintenance, it corrects the body of the car. Body correction involves repairing parts damaged by accidents or wear to meet the original factory standards. Here, we provide a detailed guide on using a car frame machine. We hope the following information will be useful to you.
Table of Contents:
-
Pre-operation Inspection
-
Loading and Unloading Procedures
-
Vehicle Securing Process
-
Measurement Procedures
Pre-operation Inspection
Before operating the car frame machine, clear any debris around the platform and the work area. Organize oil and gas pipelines to prevent them from being squeezed during operation. Ensure oil and gas pipe joints are properly connected with no leaks. Replace any damaged parts promptly and do not use damaged equipment. Check the fastening bolts of the tower column rolling pulley to prevent slippage and potential harm to personnel and equipment.
Loading and Unloading Procedures
Only trained personnel are allowed to operate the car frame machine. No one should stand under or near the correction platform when it is lifting. A designated person should guide the vehicle onto and off the platform, ensuring it stops at the specified position. The platform operation should be smooth, and the pressure relief valve of the oil pump should not be opened if there is no throttle valve on the platform wheel leg cylinder. Secure the tower column to prevent sliding when lifting the platform, and place the secondary lifting near the moving leg side. Engage the parking brake and pad the front and rear tires with triangular wood once the vehicle is on the platform. Lock the movable leg pin of the girder corrector equipment platform after raising it.
Vehicle Securing Process
Inspect the car frame machine’s clamp before use, ensuring it is free from oil and debris. Check for deformations or cracks in the fixture and replace if necessary to avoid damage from stress-induced fractures. Tighten the fixing bolts of the main fixture and the jaws’ fastening bolts as required.
Measurement Procedures
Handle the car frame machine’s measuring tools carefully to prevent deformation and damage. Take readings with your eyes parallel to the reading site to minimize errors. Return measuring tools to their original place or the tool cart immediately after use. If the fixing and connecting screws of measuring tools become loose, retighten them without applying excessive force.
Adhering to the detailed operating procedures in the instrument’s Instruction Manual is crucial for safely using the car frame machine.
Yantai Sunmo Electronic Equipment Co., Ltd.offers a variety of related equipment that you may consider purchasing from us.
